Skip to content

← R117

R117/2019-A-NL1-22.09 Rev. 0

Applicant
Endress + Hauser Flowtec AG
Issuer
NL1
Issuing year
2022
Status
Valid

Source PDF (certificates/R117/2019/r117-2019-nl1-2022-09-rev0.pdf) · extracted by OCR from the digitalized tier of the corpus.

R117/2019-A-NL1-22.09 Rev. 0

OIML Certificate

OIML Member State The Netherlands

Number R117/2019-A-NL1-22.09 revision 0 Project number 3568185 Page 1 of 4

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant Endress + Hauser Flowtec AG

Kägenstrasse 7

4153 Reinach

Switzerland

Manufacturer Newflow Ltd George House Derwent Road YO17 6YB Malton, North Yorkshire United Kingdom

Identification of the certified type An electronic calculating device intended to be used as a part of a dynamic measuring system for liquids other than water.

Type:

N $ \mathring{\mathrm{A}} $ NO or N $ \mathring{\mathrm{A}} $ NO flow computer

Characteristics See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 117-1:2019 "Dynamic measuring systems for liquids other than water"

Accuracy class 0,3/0,5/1,0/1,5

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 12 September 2022

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon at the top of the electronic version of this certificate.

OIML Certificate

OIML Member State The Netherlands

Number R117/2019-A-NL1-22.09 revision 0 Project number 3568185 Page 2 of 4

  • No. NMi-2502312-01 dated 8 March 2021 that includes 45 pages;

  • No. NMi-2502312-02 dated 8 March 2021 that includes 34 pages;

The conformity was established by the results of tests and examinations provided in the associated reports:

  • No. NMi-2607496-01 dated 19 July 2021 that includes 20 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented.

The construction of the measuring instrument is recorded in the Documentation folder no. TC11943-1.

Table 1 General characteristics

Environmental classesM1/E2/H1
Ambient temperature range-25℃...+55℃Non-condensing humidity
Power supply voltage24-32VDC with use ofP578 Energy StoreIf theP578 Energy Store is not used a redundant/back-up power supply should be used
Approved inputs-2x frequency/pulse input(configurable as dual pulse90°phase shift)-2x Temperature input(RTD);-6x Analog inputs configurable forCurrent input(4...20mA);-Voltage input(1...5V);-1xRS232 Serial communication port with shielded cable;-2xRS422 Serial communication ports with shielded cable;-1xGalvanic isolated,RS485 Serial communication port;-Ethernet communication with shielded cable.
Approved outputs-Serial communication with shielded cable;-Ethernet communication with shielded cable.

OIML Certificate

OIML Member State The Netherlands

Number R117/2019-A-NL1-22.09 revision 0

Project number 3568185

Page 3 of 4

Approved conversion calculationsAPI Manual of Petroleum Measurements Standards, Chapter 11, Physical Properties Data, Section 1 (also known as ASTM D1250-07) tables 53A, 53B, 53D, 54A, 54B, 54D, 54C, 59A, 59B, 59D, 60A, 60B, 60D and 60C.
API Manual of Petroleum Measurements Standards, Chapter 11, Physical Properties Data, Section 2 Part 4 (also known as ASTM/GPA TP-27) tables 53E and 54E.
API Manual of Petroleum Measurements Standards, Chapter 11.2.2M (pressure correction).
GPA TP-15:2003 (Calculation of Vapour Pressure for NGL).
OIML R22 International Alcoholometric tables (Alcohol concentration density calculations).

Table 2 Software identification of the electronic calculating and indicating device type NANO or NANO flow computer

Software partCRC ChecksumRemark
Totaliser281ee714633b1e8d5d6623bb61936774Totaliser block takes the calculated increments from the Liquid Flow Handler block and integrates these into check-summed totals and remainders, maintaining very high resolution over a wide number range.
Liquid Flow Handlerecd270d90c5863c3e1c7589fc72d8ba8Liquid Flow Handler generates the high-resolution increments once corrections are applied to the pulse input stream.The block also calculate instantaneous corrected flow rate values for indication purposes.
KF Linearisation31802dcd1dc23e23af6345effcbbdde1Multi point K-factor linearisation code block, that performs straight line interpolation between the points with clamped start and end values
API_Ch11-1_2012d22d623940f6cd3d386a3f97f304310aAPI Ch11.1 (2012) incorporating API Ch11.2.5

OIML Certificate

OIML Member State The Netherlands

Number R117/2019-A-NL1-22.09 revision 0

Project number 3568185

Page 4 of 4

Software partCRC ChecksumRemark
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils
API_Ch11-2-5_2007b93fe392eacc567d368bfbea9aab40feAPI Ch11.2.5,GPA TP-15(2007)Simplified Vapor Pressure Correlation for Commercial NGLs
API_Ch11-2-4_2019ed8159c9433b793c16fc1a40b5372ef0API Ch11.2.4,GPA 8217(2019)(formally TP-27)incorporating API Ch11.2.2MTemperature Correction for the Volume of NGL and LPG Tables,53E,54E,59E and 60EPressure correction provided by API Ch11.2.2M
API_Ch11-2-2M_201739d2ff37492343e213c2cccf40d82a65API Ch11.2.2M(R2017)Compressibility Factors for Hydrocarbons:350-637Kilograms per Cubic Meter Density(15℃)and-46℃to60℃Metering Temperature
OIML_R02200794f1ee95633a66005927cb10ee9ddOIML R022International Alcoholometric Tables including theBettin Spiewick ITS90 calculation

The metrological software version can be checked via the "System information" page of the build-in webserver.

Certificate history:

This revision replaces the previous version.

RevisionDateDescription of the modification
012 September 2022Initial release