R117/2019-A-NL1-22.01
OIML Certificate
OIML Member State The Netherlands
Number R117/2007-A-NL1-22.01 Project number 2504257 Page 1 of 5
Issuing authority Person responsible:
NMi Certin B.V.
M.Ph.D. Schmidt
Applicant and Manufacturer
Jiangyin Furen High-tech Co., Ltd.
ADD: No. 8-6,8-7, Xinyuan Road Jiangyin
Jiangsu
China
Identification of the certified type
A fuel dispenser (for liquids other than water) Type: HAOSHENG A-****
Characteristics
See page 2 and further
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 117-1 (2007) "Dynamic measuring systems for liquids other than water"
Accuracy class 0,5
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 20 January 2022
NMi Certin B.V.
Thijsseweg 11
2629 JA Delft
The Netherlands
T +31 88 636 2332
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
Number R117/2007-A-NL1-22.01 Project number 2504257 Page 2 of 5
The conformity was established by the results of tests and examinations provided in the associated report:
- No. NMi-2504257-01 dated 20 January 2022 that includes 114 pages.
Characteristics of the measuring instrument
In Table 1 the general characteristics of the measuring instrument are presented. The construction of the measuring instrument is recorded in the Documentation folder no. 2504257-1.
Table 1 General characteristics
| Minimum-maximum flow rate | 5-90L/min |
| Minimum measured quantity | 5L |
| Maximum pressure | 2,4bar |
| Accuracy class | 0.5 |
| Environmental classes | M2/E1 |
| Ambient temperature range | -25-+55℃;non-condensing humidity |
| Product temperature range | -5℃-+35℃ |
| Intended for the measurement of | Petrol;Diesel;Kerosine |
| Power supply voltage | 220VAC;50/60Hz |
| Software identification | Version number-Mainboard:V5.00.01.09 Version number-Keyboard:PSB-1-20110401pe |
Each HOASHENG Tax-controlled fuel dispenser consists at least of:
- One combined pump and gas eliminator device (ZCB-90);
A gas separator is not essential if a submersible pump is used, in this case measures should be taken on the supply tank to make sure that air or gas is not introduced in the system.
One measurement transducer (Piston meter (TMC-FM-1)) with magnetic encoder (pulser (B-TY9)).
One electronic calculating/ indicating device (FRJ-2003 calculator).
Optionally, a printer can be connected to the dispenser as follows:
o Printer mounted on the dispenser door;
Printer mounted on the side of the dispenser;
Remote printer connects via the POS communication cable.
The characteristics of the mentioned parts of the fuel dispenser are presented at table 3 and higher.
The same housing of the dispenser can comprise of one or more measuring systems. When more than one measuring systems are in one housing, one calculating/indicating device may be a common part of the measuring systems.
The HAOSHENG series can have a maximum of 8 main displays and a maximum of 8 delivery nozzles connected to it.
OIML Certificate
OIML Member State The Netherlands
Number R117/2007-A-NL1-22.01
Project number 2504257
Page 3 of 5
A maximum of eight nozzles can be connected to each calculating/indicating device's main display, only one nozzle out of the eight connected to a single display can be simultaneously operated.
Approved input - Pulser communication cable via DC5V
Approved output - POS communication cable via RS-485
POS communication cable via RS-422
All communication cables (POS and Pulser) should be shielded cables.
A single meter is used to deliver fuel through the hydraulic path for each nozzle.
Parts of the measuring instrument
The conformity of the following parts was established by the results of tests and examinations provided in the associated report:
Part:
Producer:
Measurement transducer
Type:
Jiangyin Furen High-tech Co., Ltd
TMC-FM-1
Documentation folder:
2504257-1
Reports:
No. NMi-2504257-01 dated 20 January 2022 that includes 114 pages.
Table 2 General characteristics of the measurement transducer type TMC-FM-1
| Flow rate range[L/min] | 5-90L/min |
| MMQ | 5L |
| Maximum pressure | 2,4bar(g) |
| In- and outlet size | 29mm |
| Product temperature range | -5℃/+35℃ |
| Intended for the measurement of | Gasoline;Diesel;Kerosine. |
| Impulse encoder or pulser | B-TY9 |
OIML Certificate
OIML Member State The Netherlands
Number R117/2007-A-NL1-22.01
Project number 2504257
Page 4 of 5
Part:
Calculating/indicating device
Producer:
Type:
Jiangyin Furen High-tech Co., Ltd.
HAOSHENG series
Documentation folder:
2504257-1
Reports:
No. NMi-2504257-01 dated 20 January 2022 that includes 114 pages.
Table 3 General characteristics of the calculating/indicating device type FRJ-2003
| Maximum volume indication | 6 Digits(4 integers and 2 decimals) |
| Maximum unit price | 5 Digits(3 integers and 2 decimals) |
| Maximum price to pay | 7 Digits(5 integers and 2 decimals) |
| Environmental classes | M2/E1 |
| Ambient temperature range | -25℃/+55℃ |
| Software identification | Version number-Mainboard:V5.00.01.09 Version number-Keyboard:PSB-1-20110401pe |
| Impulse encoder or pulser | Magnetic encoderB-TY9 |
Part:
Gas elimination device
Producer:
Jiangyin Furen High-tech Co., Ltd
Type:
ZCB-90
Documentation folder:
2504257-1
Reports: No. NMi-2504257-01 dated 20 January 2022 that includes 114 pages.
Table 4 General characteristics of the gas elimination device type ZCB-90
| Maximum flow rate | 90 L/min |
| Minimum pressure | 1,0 bar |
| Maximum pressure | 3,0 bar |
| Product temperature range | -5℃/+35℃ |
| Intended for the measurement of | Gasoline; Diesel; Kerosine. |
The gas separator is in combination with the pumping unit.
The pump type ZCB-90 is a gear suction pump.
The attached gas separator to the pumping unit is a float type mechanical device.
OIML Certificate
OIML Member State The Netherlands
Number R117/2007-A-NL1-22.01 Project number 2504257 Page 5 of 5
Production location
The fuel dispenser is produced at one of the following production locations:
- Jiangyin Furen High-tech Co., Ltd ADD: 8-6,8-7, Xinyuan Road Jiangyin, Jiangsu, China