R117/2019-A-NL1-21.12 Rev. 1

OIML Member State The Netherlands

Number R117/2019-A-NL1-21.12 revision 1 Project number 3937392 Page 1 of 3

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant ABB AG Anna-Vandenhoeck-Ring 5 37081 Göttingen Germany

Manufacturer ABB AG Schillerstrasse 72 32425 Minden Germany

Identification of the certified type

A measurement device (Coriolis sensor + transducer) intended to be used as a part of an interruptible or non- interruptible dynamic measuring system for liquids other than water. Manufacturers mark: ABB Type: FCx450 + FCT450 (see table 1 for the meaning of x)

Characteristics See following pages

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the samples identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 117-1:2019 "Dynamic measuring systems for liquids other than water"

Accuracy class 0,3 and 0,5

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Reports is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 4 June 2026

NMi Certin B.V.

Thijsseweg 11

2629 JA Delft

The Netherlands

T +31 88 636 2332

certin@nmi.nl

www.nmi.nl

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

The notification of NMi Certin B.V. as Issuing Authority can be verified at www.oiml.org

Reproduction of the complete document only is permitted.

This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon at the top of the electronic version of this certificate.

Number R117/2019-A-NL1-21.12 revision 1 Project number 3937392 Page 2 of 3

The conformity was established by the results of tests and examinations provided in the associated reports:

• No. NMi-15200437-03 dated 10 July 2017 that includes 129 pages;

• No. NMi-15200437-04 dated 10 July 2017 that includes 17 pages;

• No. NMi-1901471-01 dated 29 June 2018 that includes 66 pages;

• No. NMi-2515858-01 dated 10 January 2022 that includes 171 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented.

The construction of the measuring instrument is recorded in the Documentation folder no. TC8761-3.

Remark:

OIML Member State The Netherlands

Number R117/2019-A-NL1-21.12 revision 1 Project number 3937392

Page 3 of 3

The complete family of meter consists of one family (which are of similar construction) and have the following flow characteristics indicated in table 2. Table 2 General characteristics of the family of instruments

The metrological software is identified by the software version and/or checksum, which can be checked by scrolling the menu to: Device info/ transmitter/ Transmitter version.

Certificate history:

This revision replaces the previous version.