R117/2019-A-NL1-21.03
OIML Certificate
OIML Member State The Netherlands
Number R117/2019-A-NL1-21.03 Project number 2555194 Page 1 of 3
Issuing authority NMi Certin B.V. Person responsible: M. Boudewijns
Applicant and Petrotec
Manufacturer Parque Industrial de Guimarães
S. João de Ponte
PT 4805-661 - GUIMARÂES
Portugal
Identification of the certified type
A measurement transducer intended to be used as a part of a fuel dispenser. Type: PTF 25-80
Characteristics See page 2 and further
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 117:2019 "Dynamic measuring systems for liquids other than water"
Accuracy class 0,5
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 16 March 2021
NMi Certin B.V.
Thijsseweg 11
2629 JA Delft
The Netherlands
T +31 88 636 2332
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
The notification of NMi Certin B.V. as Issuing Authority can be verified at www.oiml.org
This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon at the top of the electronic version of this certificate.
OIML Certificate
Number R117/2019-A-NL1-21.03 Project number 2555194 Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated report/certificate:
No. PF/4794 dated March 1995 that includes 9 pages $ ^{[1]} $;
No. CPC-812356-01 dated 03 April 2009 that includes 11 pages;
No. NMi-2555194-01 dated 16 March 2021 that includes 25 pages.
Characteristics of the measurement transducer
In Table 1 the general characteristics of the measurement transducer are presented.
The construction of the measurement transducer is recorded in the Documentation folder no. TC7293-3.
The measurement transducer is a four-cylinder positive displacement meter.
Table 1 General characteristics
| Measuring principle | Four-cylinder positive displacement meter |
| Cyclic volume | 0.5L |
| Rotation value outgoing shaft | 0.5L/rev |
| Minimum measured quantity | 2 litres |
| Density range | 700...900kg/m3 |
| Viscosity range | 0.4...8mPa·s |
| Maximum pressure | 5bar(g) |
| Accuracy class | 0.5 |
| Intended for the measurement of | Gasoline and Diesel |
Table 2 Flow characteristics
| Liquid temperature range | Qmin | Qmax |
| -5℃-+35℃ | 2,5L/min | 130L/min |
| -40℃-+50℃ | 4L/min | 80L/min |
OIML Certificate
OIML Member State The Netherlands
Number R117/2019-A-NL1-21.03 Project number 2555194 Page 3 of 3
Production location
The measurement transducer is produced at one of the following production locations:
Petrotec, Inovação e Industria, SA, Parque Industrial de Guimarães, Pav. C2, S.João de Ponte, 4805-661 Guimarães, Portugal.
PETROTEC Retail Petroleum Equipment (India) Private Limited, E-108A/109/110, GIDC Electronic Estate, Sector-26, Gandhinagar-382 028 Gujarat India.
Certificate history:
This revision replaces the previous version.
| Revision | Date | Description of the modification |
| Initial | 16 March 2021 | - |
| - |