Skip to content

← R117

R117/2019-A-NL1-20.01

Applicant
Graco
Issuer
NL1
Issuing year
2020
Status
Valid

Source PDF (certificates/R117/2019/r117-2019-nl1-2020-01.pdf) · extracted by OCR from the digitalized tier of the corpus.

R117/2019-A-NL1-20.01

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-20.01 Project number 2446194 Page 1 of 2

Issuing authority Person responsible:

NMi Certin B.V. M. Boudewijns

Applicant and Graco Manufacturer 1201 Lund Blvd, Anoka, MN 55303, United States of America

Identification of the certified type

A meter including a calculating/indicating device and a transfer point Type: Pulse Pro

Characteristics

See page 2 and further

This OIML Certificate is issued under scheme A

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 117:2019 "Dynamic measuring systems for liquids other than water"

Accuracy class

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 21 July 2020

NMi Certin B.V.

Thijsseweg 11

2629 JA Delft

The Netherlands

T +31 88 636 2332

certin@nmi.nl

www.nmi.nl

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

Number R 117/2019-A-NL1-20.01 Project number 2446194 Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated report(s):

Characteristics of the measuring instrument

  • NMi-2446194-01 dated 9 June 2020 that includes 72 pages.

In Table 1 the general characteristics of the measuring instrument are presented. The construction of the measuring instrument is recorded in the documentation folder number NMi-2446194-01-1 and consists of 27 pages.

Table 1 General characteristics

Minimum-maximum flow rate2-10L/min;uni-directional
Minimum measured quantity2L
Maximum pressure103,4bar(g)(1500PSI)
Maximum volume indication9999L
Scale interval0,001L forVolume<2L0,01L for2L<Volume<100L0,1L for100L<Volume<1000L1L forVolume>1000L
Accuracy class0,5
Environmental classesM1/E1/H2
Ambient temperature range-10-+40℃;condensing humidity
Product temperature range-5-+35℃
Intended for the measurement ofLubrication oil
Viscosity range40-2000mPa·s
Power supply voltage6VDC(4xsizeAA batteries)
Software identificationVersion number:V1-01-016Checksum:9B70A2B9