R117/2019-A-NL1-20.01 Rev. 2
OIML Certificate
OIML Member State The Netherlands
Number R117/2019-A-NL1-20.01 revision 2 Project number 2563049 Page 1 of 2
Issuing authority NMi Certin B.V.
Person responsible: M. Boudewijns
Applicant and Graco
Manufacturer 1201 Lund Blvd
Anoka, MN 55303
United States of America
Identification of the certified type
A meter including a calculating/indicating device and a transfer point Type: Pulse Pro
Characteristics
See page 2 and further
This OIML Certificate is issued under scheme A
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 117:2019 "Dynamic measuring systems for liquids other than water"
Accuracy class 0,5
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 15 March 2021
NMi Certin B.V.
Thijsseweg 11
2629 JA Delft
The Netherlands
T +31 88 636 2332
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R117/2019-A-NL1-20.01 revision 2 Project number 2563049 Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated report(s):
Characteristics of the measuring instrument
- NMi-2446194-01 dated 22 July 2020 that includes 65 pages.
In Table 1 the general characteristics of the measuring instrument are presented. The construction of the measuring instrument is recorded in the documentation folder number NMi-2446194-01-2 and consists of 27 pages.
Table 1 General characteristics
| Minimum-maximum flow rate | 2-10L/min;uni-directional |
| Minimum measured quantity | 2L |
| Maximum pressure | 103,4bar(g)(1500PSI) |
| Maximum volume indication | 9999L |
| Scale interval | 0,001L forVolume<2L0,01L for2L<Volume<100L0,1L for100L<Volume<1000L1L forVolume>1000L |
| Accuracy class | 0,5 |
| Environmental classes | M1/E1/H2 |
| Ambient temperature range | -10-+40℃;condensing humidity |
| Product temperature range | -5-+35℃ |
| Intended for the measurement of | Lubrication oil |
| Viscosity range | 40-2000mPa·s |
| Power supply voltage | 6VDC(4xsizeAA batteries) |
| Software identification | Version number:V1-01-016Checksum:9B70A2B9 |
Certificate history:
This revision replaces the previous version.
| Revision | Date | Description of the modification |
| Initial | 21 July 2020 | Initial issue |
| 1 | 31 August 2020 | Correction in date of the type evaluation report and number of pages of the report. |
| 2 | 15 March 2021 | Documentation folder updated due to incorrect drawing of the oval gear metering element |