R106/2011-A-NL1-25.01 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R106/2011-A-NL1-25.01 revision 0 Project number 3783617 Page 1 of 3
Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and AMTAB Advanced Measurement Technologies AB
Manufacturer Propellervägen 6B
SE-183 68 Täby
Sweden
Identification of the An Automatic rail-weighbridge certified type Type : AMTAB WIM-8
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 106 - Edition 2011 for accuracy class 0,5,1 or 2
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 26 June 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R106/2011-A-NL1-25.01 revision 0 Project number 3783617 Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Report:
No. NMi-3783617-01 dated 26 June 2025 that includes 27 pages.
Characteristics of the non-automatic weighing instrument:
| Accuracy class wagon mass | 0,5,1,or2 | ||
| Accuracy class train mass | 0,5,1,or2 | ||
| Maximum wagon mass(Max) | 180t | ||
| Minimum wagon mass | 10t | ||
| Minimum capacity | Min≥5t | ||
| Scale interval | d≥0,1t | ||
| Maximum operating speed | Vmax=8km/h | ||
| Minimum operating speed | Vmin=3km/h | ||
| Direction of weighing | Forward and reverse | ||
| Maximum number of wagons per train | Nwmax>30 | ||
| Minimum number of wagons per train | Nwmin=1 | ||
| Electromagnetic Environment class | E2 | ||
| Climatic environment | Humidity | Indicator | Mechanical assembly with load cell |
| Location | Non-condensing | Condensing | |
| Temperature range | -10℃/+40℃ | -25℃/+40℃ | |
| Power supply voltage | 100-240V AC 50/60Hz | ||
| Weighing methods | Full-draught weighingCoupled wagon weighingTrain weighing | ||
| Application | cannot be used to weigh wagons carrying liquids or other products that may be subjected to fluctuations in its gravity centre with wagon movement | ||
| Wagons pushed/pulled | Pushed or/and pulled | ||
| Wagons coupled/uncoupled | Coupled | ||
| Software identification | Firmware version | v7.4.9-6-g73787f0 | |
| Firmware checksum | 9f7d27a8 | ||
| GUI version | v1.6.0 | ||
OIML Certificate
OIML Member State The Netherlands
Number R106/2011-A-NL1-25.01 revision 0
Project number 3783617
Page 3 of 3
Revision History
| Revision | Date | Description of the modification |
| 0 | 26 June 2025 | Initial issue. |