R105/1993-NO1-2006.01

OIML CERTIFICATE OF CONFORMITY

Issuing authority

Name: Justervesenet (N), Norwegian Metrology Service (E)

Address: Fetveien 99

N-2007 Kjeller

Norway

Notified body no.: 0431

Person responsible: Mr. Alf Magne Andreassen

Applicant

Name: Invensys Process Systems Inc.

Address: 33 Commercial Street

Foxboro

MA 02035

USA

Manufacturer of the certified pattern

Name: Invensys Process Systems Inc.

Address: 33 Commercial Street

Foxboro

MA 02035

USA

Identification of the certified pattern

Type: Direct mass flow measuring system for quantities of liquids: "Coriolis mass flow meter": Sensor: Foxboro CFS 10 and CFS 20 Transmitter: Foxboro CFT 50

OIML Accuracy Class: 0,3 or 0,5

The characteristics and specifications are described in the instruction manuals and test certificates involved.

OIML Certificate no R105/1993-NO-06.01 Project number 04/0118-4089 Page 2 of 2

This certificate attests the conformity of the above-mentioned pattern (represented by the samples identified in the associated test reports and the type-approval certificate with number N-04/2005-0431), with the requirement of the following Recommendation of the International Organisation of Legal Metrology (OIML):

R 105 Edition 1993 (E)

for accuracy class 0,3 or 0,5

This certificate relates only to the metrological and technical characteristics of the pattern of the instrument concerned, as covered by the relevant OIML International Recommendation.

This certificate does not bestow any form of legal international approval.

The conformity was established by tests described in the associated test reports:

Norwegian Metrology Service, National Laboratory: T02/2005, which includes 9 pages Norwegian Metrology Service, National Laboratory: T03/2005, which includes 8 pages Foxboro Product Assurance Laboratory: 02-9032, which includes 36 pages Foxboro Product Assurance Laboratory: 02-9032C, which includes 21 pages

24 April 2006

The CIML member

Dr. Helge Kildal

Director General

24 April 2006

Norwegian Metrology Service

The issuing authority

W.C.F.M. Andrews

Mr. Alf Magne Andreassen

Senior Engineer, Legal Metrology

Important note: Apart from the mention of the certificate's reference number and the name of the OIML Member State in which the certification was issued, partial quotation of the certificate or of the associated test report is not permitted, though they may be reproduced in full.